4 Button Keyfob

The MCT-234 is a 4-button miniature wireless keyfob transmitter designed for arming and disarming of wireless systems, and for emergency signalling, access control, home automation and remote control applications. It is powered by a standard alkaline battery and features visible and transmitted low battery indications when the battery needs to be replaced.

MCT-234 Features:
 

• Four independent functional buttons.
• Comfortable miniature attractive design.
• Superior transmission range.
• CodeSecure™ encryption technology prevents unauthorized "code grabbing".
• Standard Alkaline battery.
• Visible and transmitted low battery indication..
• Compatible with PowerMax™ and Amber..

Single Button Waterproof Miniature Pendant

The MCT-231WP is a  water-resistant miniature pendent wireless transmitter designed for emergency, arming/disarming wireless systems. Fully water-resistant, it is suitable for operation in wet environments.

This comfortable attractive miniature pendent is powered by a standard long-life Lithium battery, and features visible and transmitted low battery indications when the battery needs to be replaced. For maximum wearing flexibility, the MCT-231WP pendant is supplied with a neck-chain and a key-ring clip.

MCT-231WP Features:
 

• Fully water-resistant.
• Comfortable miniature attractive design.
• Superior transmission range.
• CodeSecure™ encryption technology prevents unauthorized "code grabbing".
• Long-life standard lithium battery.
• Visible and transmitted low battery indication.
• Neck-chain and key-ring wearing accessories included.
• Compatible with PowerMax™ and Amber.

Waterproof Wrist Band

The MCT-211 is a  miniature waterproof wrist-worn transmitter, designed for personal emergency signalling and other applications where the transmitter needs to be within easy reach at all times.

The transmitter is waterproof and suitable for wearing even in a shower or in other wet environments such as  gardens, pools and rain conditions. Attractive ergonomic design makes the MCT-211 as convenient to wear on a regular basis as any wristwatch.

The MCT-211 uses a coin-type 3-Volt long life lithium battery. To ensure continuous reliable operation, when the battery charge is low, an LED lights during transmission and a low-battery alert is sent to the target receiver.

MCT-211 Features:
 

• Easy to wear as a wristband.
• Superior transmission range.
• Attractive, comfortable, ergonomic, waterproof design.
• 3 Volt coin-type lithium battery.
• Visible and transmitted low battery indications.
• Compatible with PowerMax™ and Amber.

Universal Remote Commander for PowerMax™

The MCM-140 is the universal wireless portable remote control unit for the PowerMax™.It enables easy programming, arming and disarming of the PowerMax™ system. Among other functions, MCM-140 also enables controlling X-10 devices from anywhere in the home or office, using PowerMax™ keypad commands.

It is powered by a standard long life Lithium battery with visible and transmitted low battery alarms. A wall-mounted bracket enables mounting the unit in the most convenient place.

MCM-140 Features:
 

• Easy programming and user-friendly control of PowerMax™ system.
• Attractive modern ergonomic design for hand-held use or wall mounting.
• Back light illumination.
• Visual indications with three colour-coded LEDs.
• Audible signals confirm user commands.
• Superior transmission range.
• Long-life standard lithium battery.
• Automatic reporting of low battery.
• Available in several optional frequencies in compliance with international standards.
• Compatible with PowerMax™ and other Visonic PowerCode™ wireless systems.

Wireless Smoke Detector

The MCT-425 is a fully supervised wireless photoelectric smoke detector compatible with PowerMax™ and Amber, designed for a wide range of residential and commercial applications.

Achieving superior smoke detection sensitivity levels, the MCT-425 provides early warning of developing fire. When smoke is detected, the MCT-425 issues both sound and transmitted alarms.

The MCT-425 transmits supervisory reports, including battery condition, to the wireless control panel or receiver at regular intervals – ensuring system integrity and functionality at all times.

The easily installed MCT-425 wireless smoke detector is approved for use in most countries.

MCT-425 Features:
 

• Superior detection sensitivity.
• Sound and transmitted alerts (smoke, tamper, low battery).
• Long-life 9 Volt alkaline or lithium battery.
• Simple ceiling-mount installation with no mess.
• Easy programming and user-friendly control.
• Attractive modern design suitable for residential applications.
• Compatible with PowerMax™ and Amber..
   

Wireless Flood Detector

The MCT-550 is a wireless flood detector. It is designed to detect the presence of water in basements, Bathroom Overflows ,yachts and many others applications, providing early warning of developing floods.

In default mode, the MCT-550 transmits each flood alert message a single time. However, it may be programmed to repeat the alert every three minutes until the device is reset.


MCT-550 Features:
 

• Detects water at ground level.
• Easy installation: includes a 3m (10ft) sensor cable for high positioning of the transmitter.
• 3 Volt standard Lithium battery.
• Compatible with PowerMax™ and Amber..

Universal Wireless Transmitter

The MCT-100 is a fully supervised, two-input PowerCode™ wireless transmitter designed for protecting doors, windows or other objects and for use in a variety of security and control applications. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

The MCT-100 transmitter is compatible with virtually any normally open (NO) or normally closed (NC) device connected to its two end-of-line (EOL) protected inputs: pushbuttons, sensors, contacts, switches and other detection devices.

It is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

MCT-100 Features:
 

• Two inputs with individual ID code on each input.
• User-selectable operation of each input as NC (normally closed loop), or EOL (end-of-line loop with NC or NO sensors).
• Superior transmission range.
• Fully supervised
• Smart anti-collision mechanism supports multiple simultaneous transmissions.
• Long-life standard lithium battery included.
• Low-battery signalling.
• Compatible with PowerMax™ and Amber.

 

Wireless Pet-Tolerant Digital PIR Detector

The Next K9-85 MCW is a wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI™) and unique pet identification software algorithm, the Next K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).

Next K9-85 MCW implements a whole new generation of patented technologies including FM Digital Signal Processing (FM-DSP), "True "Motion Recognition"™ with Fuzzy Logic algorithm" (TMR™), and state-of-the-art 3D cylindrical optics.

The result is the industry's best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any pet-loving home environment.

Next K9-85 MCW Features:
 

• Pet-Tolerant for animals up to 38 kg (85 lb).
• 3 Volt long life high power standard Lithium battery.
• Long-term stability and reliability thanks to advanced true digital FM processing.
• Industry's best catch performance based on proprietary Target Specific Imaging™ and 3D cylindrical optics.
• Ultimate false alarm immunity based on patented True Motion Recognition™ with exceptionally high sampling rates and "Event Verification" algorithm.
• 12m (40 ft) 90^o multiple-curtain coverage with "wall" creep zone.
• Attractive sleek design suitable for any home or office environment.
• Compatible with PowerMax™ and Amber.

Wireless Magnetic Contact

The MCT-302 is a magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window.

An additional hard-wired, end-of-line (EOL) protected input can be used, with normally open (NO) and normally closed (NC) pushbuttons, sensors, contacts, switches and other detection devices, for a variety of security and control applications and offers an back tamper switch for detecting removal of the device from its place to comply with the latest European EN standards requirements.

Each transmitter is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

MCT-302T Features:
 

• Magnetic contact and auxiliary input for external devices.
• User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors).
• Back tamper switch detects removal from place (model MCT-302T).
• Superior transmission range.
• Long-life standard lithium battery included.
• Low-battery signaling.
   

External Wireless Siren

The MCS-700 is a outdoor (IP55) wireless siren and strobe light that eliminates siren-related cabling work. It is designed for external installation with no effect on the decor of the home.
The MCS-700 is Compatible only with PowerMax®+

MCS-700 Features:
 

• Wirefree connection between control panel and siren
• Convenient and rapid no-mess installation
• Intrusion and fire alarm signals
• Audible verification of arming and disarming
• 98 dB Piezo siren and high power strobe light
• Weather-resistant IP55
• Plug-in power supply
• NiMH rechargeable back up battery
• Available in amber, red and blue strobe lens